HP Series

The HP Series targets applications requiring high pressure in a compact form factor. The first model delivers in excess of 600 mbar. The ability to generate such high pressures from a small, controllable, and non-pulsatile pump opens up exciting opportunities in microfluidics - particularly in pressure-driven-flow (air-over-liquid) systems - and in medical and industrial applications where high differential pressure is required. In common with all Disc Pumps, HP Series pumps combine silent operation, pulsation-free flow, millisecond response and high precision in a compact form factor.

Peak pressure 600 mbar
Peak vacuum -400 mbar
Peak flow 0.10 L/min

Technical

Model	Pressure	Flow	Vacuum
HP-S-016	> 600 mbar	> 0.10 L/min	> 400 mbar

TTP Ventus is actively developing higher performance pump designs. Contact us to discuss whether we have an alternative design that meets your requirements.

ALL DIMS MM

Mounting Guidance
Mount in any orientation using compliant materials. If using mounting eyes on pump body, TTP Ventus recommends using four compliant o-rings (e.g. 1.42 ID x 1.78 CS Nitrile 70 Shore A) with two o-rings per mounting eye (one above and one below the eye), Nylon M2 bolt and threaded mounting stud (e.g. Wurth Elektronik 9774050243R). This mounting scheme isolates high-frequency vibration and prevents audible noise. Note that metal bolts are not recommended for this reason.